Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO)

Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) is a heat pump (hybrid electric) water heater from Friedrich with a 72 gallon rated tank and a 84 gallon first-hour rating at a 3.46 UEF.

Efficiency
Uniform Energy Factor (UEF) 3.46
Annual electricity use 1403 kWh/yr
Recovery efficiency 393 %
General
Fuel Electric
Capacity
First-hour rating 84 gal
Rated storage volume 72 gal
Draw pattern High
Heat pump
Heat pump type 120 Volt Integrated HPWH
Refrigerant (GWP) R-134a (GWP:1430)
Compressor low-temp cutoff 37 °F
Installation
Input voltage 120
Max current draw 12 A
Smart features
Smart / connected capable No
Dimensions
Height 57.8 in
Diameter 20 in
Certification
ENERGY STAR certified Yes

Who is the Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) for?

Similar water heaters

Frequently asked questions

Is the Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) ENERGY STAR certified?

Yes, the Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) holds a current ENERGY STAR certification for water heating efficiency (UEF 3.46).

How much does the Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) cost to run per year?

About $239 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.

What electrical circuit does the Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) need?

The Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) runs on a 120 V circuit drawing up to 12 A — many installations use an existing outlet with no new wiring.

Is the Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) a smart water heater?

No, the Friedrich Heat Pump 80-Gallon (PROH80 T0 FD120-MSO) is not connected-capable — it has no app connectivity or demand-response support.

Sources