GE Profile Heat Pump 65-Gallon (PF65S10FPY01) is a heat pump (hybrid electric) water heater from GE Profile with a 65 gallon rated tank and a 77 gallon first-hour rating at a 3.4 UEF — 1459 kWh/yr certified use, 47.5 in tall.
Our take
The most capable plug-in in the certified catalog: GE's 120-volt, 7.5-amp unit is the only shared-circuit heat pump tested under the full High draw pattern, posting a 77-gallon first-hour rating — a gallon under the 65-class median — for 5+ people. The cost of that feat is efficiency: 3.40 UEF (24th percentile) and about $248 a year, near the top of the class. R-1234yf ultra-low-GWP refrigerant, connectivity, a compact 47.5-inch height, and a 35 °F cutoff complete the picture. Single badge. No other no-rewire option feeds a full household.
Best for: Full-family capacity from a standard 120 V outlet.
Trade-off: The highest running cost among the class's upper-capacity units.
Efficiency
Uniform Energy Factor (UEF)
3.4
Annual electricity use
1459 kWh/yr
Recovery efficiency
388 %
General
Fuel
Electric
Capacity
First-hour rating
77 gal
Rated storage volume
65 gal
Draw pattern
High
Heat pump
Heat pump type
120 Volt Integrated HPWH
Refrigerant (GWP)
R1234YF
Compressor low-temp cutoff
35 °F
Installation
Input voltage
120
Max current draw
7.5 A
Smart features
Smart / connected capable
Yes
Dimensions
Height
47.5 in
Diameter
21.5 in
Certification
ENERGY STAR certified
Yes
Who is the GE Profile Heat Pump 65-Gallon (PF65S10FPY01) for?
Its 77 gallon first-hour rating suits a
household of 5+ people under DOE sizing guidance.
Estimated running cost: about $248/year at the national
average electricity rate (1459 kWh/yr certified use).
Runs on a 120 V circuit (up to 7.5 A) — often no new wiring needed.
The heat pump compressor operates down to 35 °F ambient — below that, backup
elements take over.
Is the GE Profile Heat Pump 65-Gallon (PF65S10FPY01) ENERGY STAR certified?
Yes, the GE Profile Heat Pump 65-Gallon (PF65S10FPY01) holds a current ENERGY STAR certification for water heating efficiency (UEF 3.4).
How much does the GE Profile Heat Pump 65-Gallon (PF65S10FPY01) cost to run per year?
About $248 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.
What electrical circuit does the GE Profile Heat Pump 65-Gallon (PF65S10FPY01) need?
The GE Profile Heat Pump 65-Gallon (PF65S10FPY01) runs on a 120 V circuit drawing up to 7.5 A — many installations use an existing outlet with no new wiring.
Is the GE Profile Heat Pump 65-Gallon (PF65S10FPY01) a smart water heater?
Yes, the GE Profile Heat Pump 65-Gallon (PF65S10FPY01) is connected-capable, with app control and eligibility for most utility demand-response programs.
