GE Profile Heat Pump 65-Gallon (PH65S10BPY01)
GE Profile Heat Pump 65-Gallon (PH65S10BPY01) is a heat pump (hybrid electric) water heater from GE Profile with a 65 gallon rated tank and a 87 gallon first-hour rating at a 4.3 UEF.
| Uniform Energy Factor (UEF) | 4.3 |
|---|---|
| Annual electricity use | 1154 kWh/yr |
| Recovery efficiency | 464 % |
| Fuel | Electric |
|---|
| First-hour rating | 87 gal |
|---|---|
| Rated storage volume | 65 gal |
| Draw pattern | High |
| Heat pump type | 240 Volt Integrated HPWH |
|---|---|
| Refrigerant (GWP) | R1234YF |
| Compressor low-temp cutoff | 35 °F |
| Input voltage | 240 |
|---|---|
| Max current draw | 23 A |
| Smart / connected capable | Yes |
|---|
| Height | 47.5 in |
|---|---|
| Diameter | 21.5 in |
| ENERGY STAR certified | Yes |
|---|
Who is the GE Profile Heat Pump 65-Gallon (PH65S10BPY01) for?
- Its 87 gallon first-hour rating suits a household of 5+ people under DOE sizing guidance.
- Estimated running cost: about $196/year at the national average electricity rate (1154 kWh/yr certified use).
- Needs a 240 V circuit; at 23 A max draw plan for a 30 A breaker (NEC 125% continuous-load rule).
- The heat pump compressor operates down to 35 °F ambient — below that, backup elements take over.
Similar water heaters
- AMERICAN STANDARD WATER HEATERS Heat Pump Water Heater 80-Gallon (UEF 4.01)
- Ariston Heat Pump Water Heater 80-Gallon (ARIHPWH-80) (UEF 4.01)
- Friedrich Heat Pump 80-Gallon (PROH80 T2 FD310BM) (UEF 3.5)
- Friedrich Heat Pump 80-Gallon (PROH80 T2 FD310UM) (UEF 3.5)
- Friedrich Heat Pump 80-Gallon (PROH80 T2 FD350BM) (UEF 3.5)
- Friedrich Heat Pump 80-Gallon (PROH80 T2 FD350UM) (UEF 3.5)
Frequently asked questions
Is the GE Profile Heat Pump 65-Gallon (PH65S10BPY01) ENERGY STAR certified?
Yes, the GE Profile Heat Pump 65-Gallon (PH65S10BPY01) holds a current ENERGY STAR certification for water heating efficiency (UEF 4.3).
How much does the GE Profile Heat Pump 65-Gallon (PH65S10BPY01) cost to run per year?
About $196 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.
What electrical circuit does the GE Profile Heat Pump 65-Gallon (PH65S10BPY01) need?
The GE Profile Heat Pump 65-Gallon (PH65S10BPY01) runs on a 240 V circuit drawing up to 23 A; per the NEC 125% continuous-load rule plan for at least a 30 A breaker (check the installation manual for the required circuit).
Is the GE Profile Heat Pump 65-Gallon (PH65S10BPY01) a smart water heater?
Yes, the GE Profile Heat Pump 65-Gallon (PH65S10BPY01) is connected-capable, with app control and eligibility for most utility demand-response programs.
Sources
- data.energystar.gov (retrieved 2026-07-17)