Kings Peak KNG199ICW is a gas tankless water heater from Kings Peak rated 5.7 GPM at a 0.96 UEF — 175 therms/yr certified use, 199k BTU/h input.
Also sold as the Kepler JSG52-32PCH/199KNP. This model is the same certified
hardware as the Kepler JSG52-32PCH/199KNP, published under a
different brand — full details, comparisons, and pricing live on that page. The
certified figures below are identical.
Efficiency
Uniform Energy Factor (UEF)
0.96
Annual gas use (natural gas)
175 therms/yr
Recovery efficiency
0.99 %
Annual propane use
191.25 gal/yr
General
Fuel
Natural Gas
Capacity
Max flow rate
5.7 GPM
Draw pattern
High
Minimum activation flow
0.6 GPM
Performance
Gas input rate
199 kBTU/h
Installation
Max current draw
1.3 A
Vent type
Power Direct Vent
Vent size
2 / 3
Smart features
Smart / connected capable
No
Dimensions
Height
26.8 in
Width
17.3 in
Depth
11 in
Certification
ENERGY STAR certified
Yes
Real flow rate by climate
A tankless heater's usable flow depends on how far it must raise incoming water
temperature. Sustained hot-water flow of the Kings Peak KNG199ICW at common temperature
rises (a typical shower uses about 2 GPM of mixed water):
Is the Kings Peak KNG199ICW ENERGY STAR certified?
Yes, the Kings Peak KNG199ICW holds a current ENERGY STAR certification for water heating efficiency (UEF 0.96).
How much does the Kings Peak KNG199ICW cost to run per year?
About $254 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.
What venting does the Kings Peak KNG199ICW use?
The Kings Peak KNG199ICW uses Power Direct Vent venting with 2 / 3 in vent connections. Matching the existing vent type is usually the cheapest replacement path.
Is the Kings Peak KNG199ICW a smart water heater?
No, the Kings Peak KNG199ICW is not connected-capable — it has no app connectivity or demand-response support.
