Richmond RMTGHS10IP

Richmond RMTGHS10IP is a gas tankless water heater from Richmond rated 5.2 GPM at a 0.96 UEF.

Efficiency
Uniform Energy Factor (UEF) 0.96
Annual gas use (natural gas) 176 therms/yr
Recovery efficiency 98 %
Annual propane use 192.35 gal/yr
General
Fuel Propane
Capacity
Max flow rate 5.2 GPM
Draw pattern High
Minimum activation flow 0.4 GPM
Performance
Gas input rate 180 kBTU/h
Installation
Max current draw 2 A
Vent type Direct Vent
Vent size 2
Smart features
Smart / connected capable No
Dimensions
Width 18.1 in
Depth 13.6 in
Certification
ENERGY STAR certified Yes

Real flow rate by climate

A tankless heater's usable flow depends on how far it must raise incoming water temperature. Sustained hot-water flow of the Richmond RMTGHS10IP at common temperature rises (a typical shower uses about 2 GPM of mixed water):

Temperature rise Climate Sustained flow Simultaneous showers
45 °F Warm climate (~75 °F groundwater) 5.2 GPM 2
55 °F Mild climate (~65 °F groundwater) 5.2 GPM 2
70 °F Cold climate (~50 °F groundwater) 4.9 GPM 2
77 °F DOE test condition 4.5 GPM 2

Compare the Richmond RMTGHS10IP

Similar water heaters

Frequently asked questions

Is the Richmond RMTGHS10IP ENERGY STAR certified?

Yes, the Richmond RMTGHS10IP holds a current ENERGY STAR certification for water heating efficiency (UEF 0.96).

How much does the Richmond RMTGHS10IP cost to run per year?

About $519 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.

What venting does the Richmond RMTGHS10IP use?

The Richmond RMTGHS10IP uses Direct Vent venting with 2 in vent connections. Matching the existing vent type is usually the cheapest replacement path.

Is the Richmond RMTGHS10IP a smart water heater?

No, the Richmond RMTGHS10IP is not connected-capable — it has no app connectivity or demand-response support.

Sources