GE Profile Heat Pump 80-Gallon (PH80S10BPY01) is a heat pump (hybrid electric) water heater from GE Profile with a 80 gallon rated tank and a 101 gallon first-hour rating at a 4.4 UEF — 1127 kWh/yr certified use, 57.2 in tall.
Our take
The BPY trim of GE's 80-gallon flagship concedes a tenth of UEF to its BNY sibling — 4.40, still 97th percentile — and about $5 a year, while matching the class-best 101-gallon first-hour rating. Everything else carries over: 57.2-inch height below the class median, R-1234yf refrigerant, 487% recovery, app connectivity, 240 V at 23 A on a 30 A breaker, 35 °F compressor cutoff. Certified High-draw at 1,127 kWh (about $192 a year). GE Profile badge only. Functionally interchangeable with the BNY unit; let price or availability decide, not the spec sheet.
Best for: Class-best delivery when the BNY trim is unavailable.
Trade-off: Marginally behind its own sibling — otherwise nothing.
Efficiency
Uniform Energy Factor (UEF)
4.4
Annual electricity use
1127 kWh/yr
Recovery efficiency
487 %
General
Fuel
Electric
Capacity
First-hour rating
101 gal
Rated storage volume
80 gal
Draw pattern
High
Heat pump
Heat pump type
240 Volt Integrated HPWH
Refrigerant (GWP)
R1234YF
Compressor low-temp cutoff
35 °F
Installation
Input voltage
240
Max current draw
23 A
Smart features
Smart / connected capable
Yes
Dimensions
Height
57.2 in
Diameter
21.5 in
Certification
ENERGY STAR certified
Yes
Who is the GE Profile Heat Pump 80-Gallon (PH80S10BPY01) for?
Its 101 gallon first-hour rating suits a
household of 5+ people under DOE sizing guidance.
Estimated running cost: about $192/year at the national
average electricity rate (1127 kWh/yr certified use).
Needs a 240 V circuit; at 23 A max draw plan for a 30 A breaker (NEC 125% continuous-load rule).
The heat pump compressor operates down to 35 °F ambient — below that, backup
elements take over.
Compare the GE Profile Heat Pump 80-Gallon (PH80S10BPY01)
Is the GE Profile Heat Pump 80-Gallon (PH80S10BPY01) ENERGY STAR certified?
Yes, the GE Profile Heat Pump 80-Gallon (PH80S10BPY01) holds a current ENERGY STAR certification for water heating efficiency (UEF 4.4).
How much does the GE Profile Heat Pump 80-Gallon (PH80S10BPY01) cost to run per year?
About $192 per year at national average energy rates, based on its certified annual energy use under the DOE test draw pattern. Your rate and usage change this figure.
What electrical circuit does the GE Profile Heat Pump 80-Gallon (PH80S10BPY01) need?
The GE Profile Heat Pump 80-Gallon (PH80S10BPY01) runs on a 240 V circuit drawing up to 23 A; per the NEC 125% continuous-load rule plan for at least a 30 A breaker (check the installation manual for the required circuit).
Is the GE Profile Heat Pump 80-Gallon (PH80S10BPY01) a smart water heater?
Yes, the GE Profile Heat Pump 80-Gallon (PH80S10BPY01) is connected-capable, with app control and eligibility for most utility demand-response programs.
